livestock waterers
castlerock wall or pillar
custom molding


Overview
Dependability
Other Systems
Durability
Insulation
Cleaning
How They Work
Water Levels
Operation
Installation
Earth Tube
Warranty
Specifications



 
    Agricultural
    Site Map



livestock waterers

livestock waterers stock tanks documentation parts troubleshooting warranty water articles

Product Lines
[ Electric ]
[ Energy Free ]
[ Tip Tanks ]
[ XL Series ]
[ Stock Tanks ]
[ Earth Tube]


Looking for Additional Information?
  Request Form Here 
Home  |  New Waterers  |  Product Line | Overview | Documentation

Is Proper Installation Important?

  • Absolutely! installation
  • Location of the water is important.  It should be protected from wind, snow and prevailing winds.
  • A concrete pad for the waterer to be installed on will assist with drainage and prevent a mud hole from forming.  The concrete pad must be level.
  • The base of the waterer must be caulked or weather stripped to the concrete pad to reduce the wind penetration.
  • If you are installing an electrical unit make sure it is installed by a qualified electrician. The electrician should install a properly grounded receptacle outlet, acceptable for outdoor use and protected from the rain and snow.
  • You need to run a water supply line (buried below the ground freeze line).
  • This water supply line will come up to the waterer location through an Insulated Earth Tube. You have the option of also wrapping the water supply line in electrical heat tape.

>> next page