EE50 & EE100 Heater

(This heater has been used in the EE50 & EE100 units since March 2003).

Features & Benefits

Very Flexible

• Not subject to de-lamination or element damage when flexed or bent. This element is not fragile or easily damaged.

Made of Tough Silicone Rubber

• Very tear and puncture resistant. Long life element. Water resistant rubber material.

No Thermal Runaway

• Water infiltration or heater damage will not result in runaway self destruction, hot spots or arcing.

Failsafe Mode

• To prevent overheating, the thermostat defaults to the off condition in the event of thermostat failure.

Built-in Overheat Protection

• The heating pad is made of silicone rubber with a high melting point. This heater can operate continuously with a dry bowl condition without the pad or bowl being damaged.
• Thermostat limits the temperature of the waterbowl to 26 degrees C (80 degrees F) maximum.

Long Life Thermostat

Built-in Thermostat

• The thermostat is sealed within the heating pad. Protecting it from corrosion or moisture which is present in a waterbowl environment.

Preset Thermostat Set Points

• The preset thermostat provides a convenience to the end user. The thermostat will read the ambient waterbowl temperature and will control the on/off of the heater pad.

Simplified Wiring

• As the thermostat is built into the heating pad, there is no need for complex wiring in the waterer's electrical box. There are only 2 (two) wires used.

Higher Watt Density